Tel：
15231678966 Website：
andymould.com
15231678966 Website：
andymould.com
【Common problem】The chrome - plated glass bottle moulds are widely used in gl2016-01-13
Glass bottles are widely used in our production and life, and glass bottles are used in the production of glass bottles. Glass bottle moulds have an important influence on the production and production of glass bottles.
【Common problem】The reason for the difference of hard chromium bonding streng2016-01-13
There are two main reasons for the difference of hard chrome bonding strength of glass mould: iron structure is not dense, porous, easy to infiltration solution and not easy to clean. Cast iron with high carbon content, erosion a bit excessive, surfac
【Common problem】Glass bottle moulds are important tools for making glass bott2016-01-13
Glass bottle moulds are important tools for making glass bottles. Therefore, it is necessary for glass bottle manufacturers to manufacture glass bottles.
【Common problem】The selection of mold material should pay attention to two ma2016-01-13
In order to raise the use efficiency of the mould, we can choose reasonable mould material, to improve the mold working conditions, improve the quality and service life of mould, so as to better the use of the mold, the following about mold material,
【Common problem】About die craft introduction2016-01-10
The mould designer will draw the 3D drawing according to the sample. If the 3D drawing is provided, the mould designer can conduct the review directly.
【Common problem】Design and manufacture of glass bottle mould2016-01-10
Glass bottle moulds are important tools for the production and production of glass bottles. The requirements of the design and production of glass bottle mould are: accurate size and smooth surface; Reasonable structure, high production efficiency and
【Common problem】Production steps of glass bottle molds2016-01-10
Glass bottle moulds are indispensable tools for producing large quantities of glass bottle products. Good glass bottle moulds can meet the precision of product size. The structural mechanics and mechanical properties of the products are also satisfied
【Common problem】Glass bottle moulds are indispensable in the process of makin2016-01-10
In today's different production industries, the application of glass bottles is very necessary and plays an important role in our industrial production process.
【Common problem】Mould material and heat treatment2016-01-10
The correct selection of mold material is the basis of improving the service life of the stamping die. According to the different requirements of the production parts, the corresponding materials should be selected.
